QSC AP-5122

  • $1,500.00

The QSC AcousticPerformance™ AP-5122 is a professional, two-way, full-range loudspeaker ideal for a variety of installed sound reinforcement applications requiring higher SPL output and a clean appearance. The AP-5122 uses a high power-capacity, 76mm (3-inch) diaphragm compression driver and combines it with a 305mm (12-inch) woofer to deliver exceptional full bandwidth reproduction.

The uniform power-response of the AP-5122 loudspeaker is a result of DMT™ (Directivity Matched Transition), a design approach that matches LF and HF coverage in the cross-over region. Another key to the extraordinary accuracy and flat power response of the AP-5122 is the axisymetric waveguide with uncompromised performance in both the vertical and horizontal axes. The result is remarkably consistent coverage and smooth, accurate reproduction on and off-axis.

The AP-5122 may be used as a passive (fullrange) loudspeaker to minimize amplifier channel count or it may be bi-amplified for greater control and performance. To further enhance performance, bi-amp and fullrange tunings using QSC Intrinsic Correction techniques are available for Q-Sys and future QSC products.

The AP-5122 enclosure features M10 mounting points for suspension via eyebolts as well as mount points for an optional yoke bracket.

Presenting a clean, unobtrusive look, AcousticPerformance grilles are unadorned eliminating the need to cover-up logo treatments which can be difficult to hide or remove. The grille is also lined with acoustically transparent backing adding to the enclosure’s professional appearance and the AP-5122 is available in black (RAL 9011) and white (RAL 9010) finishes.

To minimize impact and disposal fees at the job site, all AcousticPerformance loudspeakers are packaged in environmentally friendly, recyclable cartons

  • DMT™ (Directivity Matched Transition) ensures smooth, coherent power response across the listening plane
  • 3” diaphragm compression delivers a clean and powerful high frequency response
  • M10 fittings and yoke mount fittings offer flexible deployment options for a variety of applications
  • Clean industrial design with unadorned grilles complement most decors and settings
  • NL4 Speakon connector (two on AP-4122m and AP-212sw) and covered barrier strip terminals (except AP-4122m and AP-212sw)
  • Bi-amp / passive switchable (passive only on AP-4122m), except AP-212sw subwoofer
  • Constructed from 15-ply Baltic birch plywood (15 mm Baltic birch plywood on AP-4122m and AP-212sw)
  • 16-gauge powder coated steel grilles
  • Available in black (RAL 9011) and white (RAL 9010)
Frequency response (-10 dB) 48 Hz - 18 kHz
Rated noise power / voltage1 550 watts / 60 volts rms
Broadband sensitivity2 95 dB SPL
Coverage angle 90˚ conical DMT
Directivity factor (Q) 6.0
Directivity index (DI) 7.8
Recommended crossover 950 Hz, 48 dB/octave
Maximum SPL at 1 m (passive) 122 dB continuous3
128 dB peak4
Rated impedance
HF transducer 76 mm (3-inch) voice coil, compression driver
72 W/ 24 V (2 hours)
LF transducer 305 mm (12-inch) driver with 102 mm (4-inch) voice coil;
550 W / 60 V (2 hours)
Optional accessories AP-YM12 Yoke mount
M10 Kit-W
Enclosure details
Input connector Covered barrier strip, NL4 connector
Enclosure material 15 mm Baltic birch plywood
Attachment points Fifteen M10 threaded inserts
Color Black (RAL 9011), White (RAL 9010)
Grille 16-gauge powder coated steel
Dimensions (H×W×D) 26-inch × 15-inch × 13-inch / 660 × 381 × 330 mm
Net weight 65 lb / 29.5 kg
1 2 hour rating using IEC60268 noise based on minimum impedance
2 Mid-band based on nominal impedance; 2.83 V at 1 m for 8Ω loudspeakers or 2 V at 1 m for 4Ω
3 Calculated as the nominal sensitivity plus 10× the log of continuous rated power in volts squared divided by nominal impedance
4 Calculated as the continuous calculated max output plus 6 dB
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
  • 1x AP-5122 High-Power, 12 in 2-way, 90˚ conical DMT Loudspeaker

We Also Recommend