QSC AD-P6T 6.5" Two-Way Pendant-Mount Loudspeaker in Black

  • $320.00


The QSC AcousticDesign™ AD-P6T is a 6.5" two-way pendant-mount loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16O bypass configurations. 

The AcousticDesign™ Series offers integrators a premium quality installed sound solution where performance, consistent coverage, and aesthetics are paramount. Specifically designed to maintain a consistent tonal characteristic across the entire family in ceiling, surface, and pendant applications, the AcousticDesign Series allows integrators seamless transitions within blended installations. 

DMT (Directivity Matched Transition™) is QSC’s design philosophy where the high frequency waveguide is matched to the natural conical behavior of the woofer at the crossover point. The result is a coherent transition between transducers with improved off-axis power response for consistent 135° conical DMT coverage. 

The AD-P6T features a high quality 6.5" weather treated paper cone woofer with a 1" voice coil and a 0.75" aluminum dome tweeter positioned on a DMT waveguide. 

The accurate frequency response of the AD-P4T is maintained even in 70/100V applications by use of a low-loss, lowsaturation 60-watt transformer with selectable taps, including 16O bypass, using a rotary selector located under the snap-fit magnetically attached powder coat steel grille. 

To retain lasting good looks, the rugged ABS enclosure is further protected by using UV inhibitors that prevent discoloration. The magnetic grille features a stick-on logo that can be removed blemish-free for installations where branding is not permitted. Installers will appreciate the two quick-link cable assemblies and slip-lock fasteners to speed the installation. Located under a sealable input cover to prevent moisture at the terminals, a locking 4-pole Euro-block connector that can accept four 18AWG pairs eliminates the termination hassles of star topology wiring designs. 

To further speed the install process while obtaining optimal results, Intrinsic Correction™ voicings are easily deployed via Q-SYS Platform and CXD Series amplifiers, as part of a complete QSC Systems solution. The AD-P6T is available in QSC standard black (RAL 9011) or white (RAL 9010) and may be painted to match any decor.

Features:

  • Consistent tonal characteristics across the entire AcousticDesign family in surface, ceiling, and pendant applications
  • DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area
  • Snap-fit magnetic grille
  • 2x quick-link suspension cables and slip-lock fasteners provided
  • Intrinsic Correction™ voicings available via Q-SYS Platform and CXD amplifiers
  • Low-saturation and low-loss 70/100V transformers with 16O bypass
  • Blemish-free removable logo
  • Sealable input cover to prevent moisture from entering the input terminal block
  • Complete EASE, CF2, CAD, & BIM information available online

Specifics:

  • Effective frequency range: 55 Hz – 20 kHz
  • Rated noise power / voltage: 60 watts / 31 volts (rms)
  • Sensitivity [dB] 3 Sensitivity at 4m, 100V maximum: 88; TBD
  • Rated coverage (-6 dB): 135° conical DMT™
  • Directivity factor: 6.5
  • Directivity index [dB]: 8
  • Maximum continuous SPL [dB]: 106
  • Maximum peak SPL [dB]: 112
  • Nominal impedance [ohms]: 16
  • Recommended amplifier: 120 watts
  • Transformer taps / impedance: 16O (in bypass setting); 7.5W (70V); 15W (100V) Tap: 667O; 15W (70V); 30W (100V) Tap: 333O; 30W (70V); 60W (100V) Tap: 167O; 60W (70V); N/A (100V) Tap: 83O
  • LF transducer: 165 mm [6.5-inch] weather treated paper cone woofer
  • HF transducer: 19 mm [0.75-inch] aluminum dome tweeter
  • Input connector type: Euroblock connector with parallel output
  • Enclosure material: Impact Resistant ABS
  • Grille material: Powder coated steel
  • Ingress protection: IP-34
  • Operating environment: Designed for indoor use
  • Operating temperature range: -20 to 50° C [-4 to 122° F]

Includes:

(1) QSC AD-P6T Pendant Mount Loudspeaker
(1) User Manual
(2) Quick-link cable assemblies (length 3.25m/ 128-inch 2mm thickness)
(2) Slip-lock fasteners
(1) Locking euro-block connector
(1) Sealable input cover and screws
(1) Snap-fit magnetic grille


We Also Recommend